| Item Name: | NEMA 17 Stepper Motor – High Precision |
| Specification: | 2 Phase, Step Angle 1.8, NEMA 17. 5mm Shaft Diameter. |
| PCs in Item: | 1 (Motor x 1, XH2.54 JST or Dupont Wire x 1) |
| Manufacturer: | GuangDong, Made in China |
| Model# | Length(mm) | Holding Torque(Nm) | Rating Current(A) | Phase Resistance(Ω) | Inductance(mH) | Inertia(g.cm²) | Shaft(mm) |
|---|---|---|---|---|---|---|---|
| 17HS2408 | 28mm | 0.12 | 0.6 | 2.2 | 2.5 | 34.0 | 25.0 |
| 17HS3401 | 34mm | 0.28 | 1.3 | 2.4 | 2.8 | 34.0 | 25.0 |
| 17HS4401 | 40mm | 0.40 | 1.5 | 1.9 | 3.4 | 54.0 | 25.0 |
| 17HS8401 | 48mm | 0.52 | 1.8 | 1.8 | 3.4 | 68.0 | 25.0 |
| 17HS6401 | 60mm | 0.70 | 1.7 | 2.5 | 5.4 | 72.0 | 25.0 |
| 17HS9401 | 80mm | 0.90 | 2.8 | 1.8 | 3.5 | 83.0 | 25.0 |
adsine –
I bought two 48mm length body motors to replace the X, Y smaller motor in my desktop CNC. I am now using a TB6600 driver with 24V DC. After a week of running, I am happy with this upgrade. In fact, when I tested it at about 900 rpm, it had some missing steps, but it is much better than the old one (hot and too much missing steps). I would like to say this one is incredibly good, and I got faster and quieter performance.
Customer Service –
Glad to know those are working good for your project. Thanks for supporting our business.
noname –
So so, it makes some noise